I have had some questions on how to make the fringed flowers so here are a few pictures and some instructions!
- I used a 2 inch by 7 inch strip but the length could be whatever you like.
- I put a piece if my 1/4 inch sticky Tape along one edge on each side of the DSP strip but didn't peel off the tape backing.
-Then I folded the DSP strip in half lengthwise. I fold and cut on the side I don't want showing.
-cut the fringe on the folded side of the DSP the entire length of the DSP.
-open the folded fringe and smooth out the crease to the side you want showing.
-Then I peeled off the backing of the tape and taped the two uncut edges together.
-The expose the adhesive on your fringe strip and start wrapping the fringe around dowel, gradually moving down the stick. You could also just wrap without moving down the stick and get a different kind of flower.